Align Trex 250 Helicopter – Setup Buy it now on eBay
Total cost around $600.00 For New Complete Kit as shown below

Align Trex 250

 
Bookmark and Share
 
This miniaturized Align Trex 250 Radio Controlled Helicopter flies very well and parts are easily obtained. This Align Trex 250 helicopter is perfect for those who don't have space to fly or can only fly at small fields or parks. The Align Trex 250 can be setup for both the 3D pilot in mind or a beginner that is not use to the sensitive controls. This little helicopter resembles Align's popular 450-sized helicopters with some little flairs from the 500-sized TREX.
 
Transmitter - Spektrum DX6i
The 6-channel DX6i uses the same full-range DSM2™ technology found in Spektrum DX6i the Spektrum DX7 and includes an impressive list of programming features for helicopters that are simple to access and use. The DX6i is also compatible with all existing Spektrum aircraft receivers. Whatever kind of flying you do, the DX6i can be used for any existing Helicopter that requires 6-channels or less. This is perfect for the Trex 450 RC Helicopter and about half the price of a DX7.
 

 

At only 4.4 grams and 19.0 x 40.0 x 9.0mm Spektrum AR6100e (WxLxH), the AR6100E is the ultimate 2.4GHz receiver for most any small electric model from mini profile foamies to 400 class helis. Because it uses advanced DSM2™ technology, it is only compatible with DSM2 aircraft radio and module systems. It also boasts a wide input range that allows it to operate with 3.5- to 9.6-volt electrical systems. The range would be further than you would ever fly safely.
 
This is the GY401 Gyro with SMM Technology Futaba GY401from Futaba. This is a High Performance, Compact and Lightweight (AVCS) Angular Vector Control System gyro developed for model helicopters. Because the sensor and control circuit are integrated, it is simple to install. This is spot on the money, as close to plug and play as you will get. This is now seen as an "older" type of Gyro although still readily available. It is a simple and robust winner and will be around for some time.
 

 

Motor - Align - 250 high performance brushless motor (3400KV)
The outrunner high efficiency blushless motor Align 250 Brushless motorwas invented for T-Rex 250. Not only the superior torque and the explosive force, the 250 motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have. Maintenance free, high torque, high efficiency, stable and quiet. Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.

 

 
Spec:
Input voltage:DC7.4-11.1V 2-3cell Li-Po
Max continuous current:13A/16A(30sec)
Max output power:Approx. 140W/170W(30sec)
KV value:3400KV
Dimension:spindle 2.5x24.8x22mm
Weight:Approx. 30g
 
The Align line of brushless sensor-less speed Align RC BEC ESCcontrollers is an excellent choice for small helicopters. You can use them with virtually any brushless out-runner or in-runner motor.
 
BEC max. current 2A, for 2-4 servos
Small and compact PCB design for ease of installation
Large heat-sink for great thermal performance
Ultra smooth motor start design to run with all kinds of brushless motors

 
Spec:

Special Features Governor Mode

Cont/Max Amp 15/20A

Cells NiMH/NiCD 6-10 cells

Cells Li-poly 2-3 cells

Voltage 5.5-12.6V
Programming Fully Programmable

Type/Max BEC (A) Linear/3A

Max #Servos/V 2-4/6V

Dimensions 42mm x 24mm x 9.3mm

Weight 15g
 
Tail Servo -Digital - FUTABA S3153
This is the S3153 Digital High Speed Micro Futaba S3153Mini Servo, Designed for use with Futaba Radio Control Systems. This Servo is the Digital High Speed version of the S3103 Servo. This is more than enough for the Trex 450, small but punchy.
Spec:
Speed: .11 sec/60° @ 4.8V
 .09 sec/60° @ 6V
Torque: 19 oz-in (1.4kg/cm) @ 4.8V 24 oz-in (1.7kg/cm) @ 6V
Dimensions: .9" x 0.4" x 0.8" (22 x 11 x 20mm)
Weight: .34oz (9.6g)
Output Shaft Diameter: 5mm
 

3 X Main Servo -Digital -HITEC HS-5065MG
This is the Hitec HS-5065MG Mighty Feather Hitec HS-5065 ServoMetal Gear Micro Digital Servo with Universal Futaba J, Hitec S, JR and Airtronics Z Connector. Best choise, robust and accurate.

 
 
 
Astroflight Blinky lithium cell balancer LiFePO4 A123
Very simple to use, the Astro 'Blinky' is Astroflight BlinkyPACKED with features to allow SAFE: balancing, charging, and discharging of each cell within your Lithium pack, also use to check voltages of each cell. Use the Astro 'Blinky' to check for low voltages in your pack, checks each cell. Can be used to balance pack while charging (use with any dedicated Lithium Charger). Can also be used to balance the pack after charging to ensure correct voltage of EACH cell within the pack!
 
Battery Charger - Hobbico Accu-Cycle Elite Battery Cycler
Charges, Discharges and Cycles NiCd, NiMH and Lithium-based Hobbico Battery Lipo chargerbattery packs. Perfect for radio batteries, Lithium Park Flyer batteries, plus single cell glow starter cells.

<SPAN style="FONT-FAMILY: 'Arial','sans-serif'; COLOR: #51515

Search Our Store


    Advanced

    Search title & description

Site Navigation

Sponsored Links